Brake parts for rear dana 44

Need some help with your IH? Just ask.
Post Reply
ONTHEROADAGAIN
Newbie
Newbie
Posts: 2
Joined: Wed Mar 15, 2023 9:21 pm
Vehicle(s): 1968 scout 800

Hi all,
I have rear dana 44 with 3.73 gear ratio on a 1968 scout 800 v8 4x4.

I need help with parts...

NEED rear hardware for brakes plus shoes/pads.

also brake wheel cylinders.

Im in Gilroy, ca
User avatar
ShaunT
Full Tank
Full Tank
Posts: 104
Joined: Fri Jan 20, 2017 6:15 pm
Location: Orange County, CA
Vehicle(s): 74 Scout II. Orange Crush

You can find kits for the appropriate parts on line or any major auto parts store
User avatar
Wmontaney
Three-quarter tank
Three-quarter tank
Posts: 76
Joined: Sun Jan 22, 2017 3:23 pm
Location: San Diego
Vehicle(s): 1978 SSII
Contact:

ONTHEROADAGAIN wrote: Wed Mar 15, 2023 10:01 pm Hi all,
I have rear dana 44 with 3.73 gear ratio on a 1968 scout 800 v8 4x4.
Is this your stock rear axle or another from like a Scout II? Brake shoes are different sizes between 800 (11"x1.75") and 74-80 Scout II (11"x2.25").
ONTHEROADAGAIN wrote: Wed Mar 15, 2023 10:01 pm NEED rear hardware for brakes plus shoes/pads.
You need shoes or pads? There is a difference. Did you do a disk conversion in rear to require pads?
Fronts would be pads with disk brakes, rears would be shoes with drum brakes.

I just ordered all my brake components, front pads, rear shoes, wheel cylinders and new hardware from Rockauto.
Bill--
San Diego Chapter
KJ6WJL

1978 SSII
ONTHEROADAGAIN
Newbie
Newbie
Posts: 2
Joined: Wed Mar 15, 2023 9:21 pm
Vehicle(s): 1968 scout 800

yes, no pads, shoes... I will check rock auto.

thank you
Post Reply