Eds truck

Pretty much an open forum. Need to get something off your chest? Dump it here.
Post Reply
User avatar
Big Ed
No limits
No limits
Posts: 228
Joined: Thu Jan 19, 2017 8:01 pm
Location: Fresno, CA
Vehicle(s): C1300 and 1110D

Time to rebuild the engine.

I worked yesterday and today to get it out, my son Daniel helped today.
Image

Image

Image
64 C1300 4X4, 345, T34, T18, NP202, D70F with ARB & 35 spline Chromoly axles, RA15 with Detroit Locker, 41" Iroks, front & rear PTO winches, recent makeover.
User avatar
73IHC
Quarter-tank
Quarter-tank
Posts: 34
Joined: Sat Jan 21, 2017 12:57 am
Vehicle(s): S120, Sportop, Scout II

Nice Ed... first build post!
User avatar
Big Ed
No limits
No limits
Posts: 228
Joined: Thu Jan 19, 2017 8:01 pm
Location: Fresno, CA
Vehicle(s): C1300 and 1110D

You know me, always working on something.

I was already planning on rebuilding it because it had lost a lot of power, then it conked out and had to be towed home. I plan on taking it apart enough to see if it's rebuildable.
Last edited by Big Ed on Thu Jan 26, 2017 9:03 pm, edited 1 time in total.
64 C1300 4X4, 345, T34, T18, NP202, D70F with ARB & 35 spline Chromoly axles, RA15 with Detroit Locker, 41" Iroks, front & rear PTO winches, recent makeover.
User avatar
fpscabs
No limits
No limits
Posts: 206
Joined: Mon Jan 16, 2017 9:45 pm
Location: Glendora, CA
Vehicle(s): 1970 Travelall

anything special planned?
Fritz...
Past President, Main Chapter
OHV 167v SBNF
KJ6RUN
Certifications:
First Aid, Chainsaw, 4x4, ATV,


1970 Travelall, 392 1100D
User avatar
Wmontaney
Half-tank
Half-tank
Posts: 68
Joined: Sun Jan 22, 2017 3:23 pm
Location: San Diego
Vehicle(s): 1978 SSII
Contact:

Looking forward to following.
Are you going to go in depth on what you do to the engine?
Bill--
San Diego Chapter
KJ6WJL

1978 SSII
User avatar
Big Ed
No limits
No limits
Posts: 228
Joined: Thu Jan 19, 2017 8:01 pm
Location: Fresno, CA
Vehicle(s): C1300 and 1110D

fpscabs wrote:anything special planned?
No.
64 C1300 4X4, 345, T34, T18, NP202, D70F with ARB & 35 spline Chromoly axles, RA15 with Detroit Locker, 41" Iroks, front & rear PTO winches, recent makeover.
User avatar
Big Ed
No limits
No limits
Posts: 228
Joined: Thu Jan 19, 2017 8:01 pm
Location: Fresno, CA
Vehicle(s): C1300 and 1110D

Wmontaney wrote:Looking forward to following.
Are you going to go in depth on what you do to the engine?
Likely yes.

Took it apart more today, nothing obviously wrong yet.
Image

Image

Image

Image
64 C1300 4X4, 345, T34, T18, NP202, D70F with ARB & 35 spline Chromoly axles, RA15 with Detroit Locker, 41" Iroks, front & rear PTO winches, recent makeover.
User avatar
Big Ed
No limits
No limits
Posts: 228
Joined: Thu Jan 19, 2017 8:01 pm
Location: Fresno, CA
Vehicle(s): C1300 and 1110D

Number 1 and 2 connecting rods are broken, one bolt came loose and backed all the way off, then the other bolt broke. Once that one was loose, it tore up the other connecting rod. I already took it to the rebuilder. I hope the block is still usable, otherwise I need to tear down another engine and see if the block is good. This block hasn't been bored over, I like that.

Image

Image

Image

Image

Image
64 C1300 4X4, 345, T34, T18, NP202, D70F with ARB & 35 spline Chromoly axles, RA15 with Detroit Locker, 41" Iroks, front & rear PTO winches, recent makeover.
User avatar
Big Ed
No limits
No limits
Posts: 228
Joined: Thu Jan 19, 2017 8:01 pm
Location: Fresno, CA
Vehicle(s): C1300 and 1110D

I found more of a close up of the broken stuff.

Image
64 C1300 4X4, 345, T34, T18, NP202, D70F with ARB & 35 spline Chromoly axles, RA15 with Detroit Locker, 41" Iroks, front & rear PTO winches, recent makeover.
User avatar
Desert Scout
Full Tank
Full Tank
Posts: 124
Joined: Tue Jan 24, 2017 4:15 pm
Vehicle(s): 63 & 64 S80 4x4

These ol things are pretty tough, hopefully the block is good.
Chuck & Ruthie
WN7CHK & KJ6RTJ
87 HD FLHTP
2011 Ranger S/C
1990 F350 Lariat S/C Dually
1990 S&S 11SCB Camper
Post Reply