Page 1 of 2

MEETING AND WORK DAY FEB 22

Posted: Sat Jan 25, 2020 7:29 pm
by ShaunT
If you are planning to attend the work day and meeting and Tom's on Feb 22 please post here what you want worked on so we have an idea of what to expect and everyone is prepared.

Address: Tom's House 2550 Cliff rd. Upland CA https://goo.gl/maps/ambrWdADRif1a1RL6

Re: MEETING AND WORK DAY FEB 22

Posted: Sun Feb 09, 2020 4:40 pm
by ShaunT
Per Tom Maricella's scout "Norburg" will need the following looked at on the work day:
brakes I hear something rear There are a set rare shoes inside the back
left hub won’t turn right hub is tight
F R spring broken clamp
Needs rear seat mounting plates
Door locks won’t stay up
Needs a steering stabilizer
Sometimes it won’t start and park
Holes in the floor pan

Re: MEETING AND WORK DAY FEB 22

Posted: Sun Feb 09, 2020 4:42 pm
by ShaunT
My scout...
I have a dent on the driver side behind the rear wheel I need to hammer back in shape
get my license place lights working

Re: MEETING AND WORK DAY FEB 22

Posted: Tue Feb 11, 2020 3:28 pm
by Big John
Address please.

Re: MEETING AND WORK DAY FEB 22

Posted: Wed Feb 12, 2020 8:42 am
by ShaunT
Tom's House 2550 Cliff rd. Upland CA https://goo.gl/maps/ambrWdADRif1a1RL6

Re: MEETING AND WORK DAY FEB 22

Posted: Wed Feb 12, 2020 5:51 pm
by Tim Potter
ShaunT wrote:
Sun Feb 09, 2020 4:40 pm
Per Tom Maricella's scout "Norburg" will need the following looked at on the work day:
brakes I hear something rear There are a set rare shoes inside the back
left hub won’t turn right hub is tight
F R spring broken clamp
Needs rear seat mounting plates
Door locks won’t stay up
Needs a steering stabilizer
Sometimes it won’t start and park
Holes in the floor pan
whats a FR spring clamp?
does she have a stabilizer?
not starting in park may be because the trans isnt actually in park. cable adjustment maybe.
holes in floor pan are the least of the rust problems she has. body mounts are completely rusted out. if the holes are too breezy, a couple tubes of RTV can seal 'em up for short term, but the truck needs major surgery.

Re: MEETING AND WORK DAY FEB 22

Posted: Tue Feb 18, 2020 7:51 pm
by WILD BILL
Hello all I'm the new guy, wondering if it will be OK to meet up with some of you at this Saturdays work day in the afternoon. Very interested in joining even though my scout needs a little more TLC & parts before it hits the road. I did meet up with one of the members at Farmer Boys in Riverside back in Oct. Hoping to see you this Sat.

Re: MEETING AND WORK DAY FEB 22

Posted: Tue Feb 18, 2020 8:36 pm
by ShaunT
Yes Bill come on by and hang out with us... looking forward to meeting you

Re: MEETING AND WORK DAY FEB 22

Posted: Wed Feb 19, 2020 8:54 am
by Tiki800
I live in upland! Would like to stop by and say hello. Need a trailer to bring my basket case with me. Currently dealing with removing the original spring bushing sleeves from the frame mounts, not going well.

Re: MEETING AND WORK DAY FEB 22

Posted: Wed Feb 19, 2020 2:39 pm
by Mr Meaty
What time are ya going to get going?